Inserting Media; Media Playback Controls - Panasonic SC-PMX70 Operating Instructions Manual

Compatible USB devices
• This unit does not guarantee connection with all USB
devices.
• FAT12, FAT16 and FAT32 file systems are supported.
• This unit supports USB 2.0 High Speed.
• This unit can support USB devices of up to 32 GB.
• Supported file formats and extensions:
MP3 (".mp3"), AIFF (".aiff"), FLAC (".flac"),
WAV (".wav"), AAC (".m4a")
Note:
• Files are defined as tracks and folders are defined as
albums.
• This system can access up to:
- 800 albums (including root folder)
- 8000 tracks
- 999 tracks in one album
Compatible CD
• This system can play back discs that conform to the
CD-DA format.
• This system can play back CD-R/RW with CD-DA or
MP3 format content.
• Before playback, finalise the disc on the device it was
recorded on.
• Disc must conform to ISO9660 level 1 or 2 (except for
extended formats).
Note:
• Some CD-R/RW cannot be played because of the
condition of the recording.
• MP3 files are defined as tracks and folders are defined as
albums.
• This system can access up to:
- CD-DA: 99 tracks
- MP3: 999 tracks, 255 albums (including root folder)
• Recordings will not necessarily be played in the order you
recorded them.
8

Inserting media

CD
Label facing up
OPEN/CLOSE
Press [CD/USB] to select "CD".
iPhone/iPad/iPod or USB device
• Connect only compatible iPhone/
iPad/iPod models ( 7).
Failure to do so may result in
unexpected behaviour.
5V 2.1A
Press [CD/USB] to select "USB".
The display will automatically change to "IPOD" when a
compatible iPhone/iPad/iPod is connected to the port.
Charging an iPhone/iPad/iPod
During unit on, charging starts when an iPhone/iPad/
iPod is connected to this unit.
• To continue charging from the USB cable connection
during standby mode, make sure the iPhone/iPad/iPod
has started charging before turning the unit to standby
mode.
• Check the iPhone/iPad/iPod to see if the battery is fully
charged. (Once fully charged, remove the iPhone/iPad/
iPod.)
Note:
• Remove the CD only after it stops rotating.
• When connecting an iPhone/iPad/iPod, use the dedicated
USB cable (not supplied).
• Insert the USB device directly. Do not use any USB
extension cable.
• Please disconnect the USB device if you finish using.
• Before removing the USB device, select a source other
than "USB".

Media playback controls

The following marks indicate the availability of the feature.
CD audio in CD-DA format and a CD that
[CD]:
contains MP3 files
Compatible iPhone/iPad/iPod
[iPod]:
USB devices containing MP3/AIFF/FLAC/
[USB]:
WAV/AAC files
[Bluetooth]: Connected Bluetooth
OPEN/CLOSE Preparation
• Turn the unit on.
• Insert the media or connect the Bluetooth
• Press [CD/USB] or [
Basic controls
Play
Stop
Pause
Skip
Search
Note:
• To use this unit's remote control with a Bluetooth
the Bluetooth
®
Remote Control Profile).
Depending on the status of the device, some controls may
not work.
• Operation results may vary depending on the iPhone/iPad/
iPod models.
• [CD] [USB]: Tracks can be selected by pressing the numeric
buttons.
device
®
device.
®
] to select the audio source.
[CD] [iPod] [USB] [Bluetooth]
Press [1/;].
Press [∫].
• [USB]: The position is memorised and
"RESUME" is displayed.
• [USB]: Press [∫] two times to stop the
playback fully.
Press [1/;].
Press again to continue playback.
Press [:] or [9] to skip track.
(main unit: [:/6] or [5/9])
[CD] [USB]: Press [3] or [4] to skip the
MP3/AIFF/FLAC/WAV/AAC album.
During play or pause
Press and hold [6] or [5].
(main unit: [:/6] or [5/9])
• [iPod]: Backwards search is only within
the current track.
device,
®
device must support AVRCP (Audio Video