[Pmx70B] Dab - Panasonic SC-PMX70 Operating Instructions Manual

To display the current FM signal status
Press [DISPLAY].
• For Continental Europe:
Press [DISPLAY] repeatedly to select "FM STATUS".
"FM ST": The FM signal is tuned and in stereo.
"FM - - - -": There is no tuned signal or the FM signal
is in monaural.
"FM MONO": "MONO" is selected as the "FM MODE".
( 12, "If noise is excessive during FM
reception.")
RDS broadcasting
(For Continental Europe only)
This system can show the text data transmitted by the
radio data system (RDS) available in some areas.
Press [DISPLAY] repeatedly.
"PS": Programme service
"PTY": Programme type
"FREQ": Frequency
Note:
• RDS is available only when stereo works in reception.
• RDS may not be available if reception is poor.

[PMX70B] DAB+

Preparation
Press [RADIO, EXT-IN] repeatedly to select "DAB+".
If you select "DAB+" for the first time, the system will
start the "DAB AUTO SCAN" procedure.
Note:
• If no station is detected, "SCAN FAILED" is shown.
Adjust the antenna and try again.
DAB auto scan
1
Press [RADIO MENU] to select "AUTOSCAN" and
then press [OK].
"START?" is shown.
2
Press [OK].
"DAB AUTO SCAN" is shown.
10
DAB manual tuning
To find the best antenna position, use manual tuning to
search selected DAB frequency block.
1
Press [RADIO MENU] repeatedly to select
"MANUAL SCAN".
2
Press [2, 1] to select a frequency block to scan
and then press [OK].
Memory presetting
You can preset up to 20 DAB stations.
1
Press [6] or [5] to select a station.
• Alternatively, press [:/6] or [5/9] on the
main unit when "STATION" is selected as the tune
mode* .
1
2
Press [PROGRAM].
3
Press the numeric buttons to select a preset
number.
Do steps 1 through 3 again to preset more stations.
Note:
• A station previously stored is overwritten when another
station is stored in the same preset number.
• You cannot preset a station when the station is not
broadcasting or when you have selected a secondary
service.
• Previous station memory is cleared during auto scan.
Selecting a preset station
Press the numeric buttons, [:] or [9] to select
the preset station.
• Alternatively, press [:/6] or [5/9] on the main
unit when "PRESET" is selected as the tune mode*
*1: To change the tune mode
1 Press [RADIO MENU] repeatedly to select "TUNE
MODE".
2 Press [2, 1] to select "STATION" or "PRESET", and
then press [OK].
Viewing available information
You can view information about the DAB broadcast,
programme type, ensemble label, frequency and time.
Press [DISPLAY] to view available information.
DAB settings
1
Press [RADIO MENU] repeatedly to select an
option.
2
Press [2, 1] to select the desired setting and
then press [OK].
DAB SECONDARY
PRIMARY To listen to primary service.
SECONDARY To listen to secondary services.
" " is shown.
AUTO CLOCK ADJ
ON ADJUST Start auto clock adjustment.
OFF ADJUST Cancel auto clock adjustment.
DAB signal quality
When adjusting the antenna, you can check the
reception quality.
1
Press [RADIO MENU] repeatedly to select
"SIGNAL QUALITY".
2
Press [2, 1] to select frequency.
The current frequency block is displayed and then
the reception quality is indicated.
1 .
Reception quality
0 (poor) to 8 (excellent)