Media Information - Panasonic SC-PMX70 Operating Instructions Manual

1
Press [ ] to select "BLUETOOTH".
2
Touch and hold your device on the NFC touch
area of this unit [ ]. ( 5)
Do not move the Bluetooth device until it beeps,
®
displays a message or reacts in some way.
Once the Bluetooth device has reacted, move the
®
device away from this unit.
• When the registration and connection of the Bluetooth
device is complete, the name of the connected device
is indicated on the display for a few seconds.
• The location of the NFC touch area differs depending
on the device. When a connection cannot be
established even if your Bluetooth
the NFC touch area of this unit, change the position of
the device. The condition may also improve if you
download the dedicated app "Panasonic Music
Streaming" and start it up.
3
Start playback on the Bluetooth
Note:
• If you touch another device to this unit, you can update the
Bluetooth connection. The previously connected device
®
will be disconnected automatically.
• When the connection is established, playback may start
automatically depending on the type of device being used.
• The One-Touch Connection may not work properly
depending on the type of device being used.
Bluetooth transmission mode
®
You can change the transmission mode to prioritise
transmission quality or sound quality.
Preparation
• Press [ ] to select "BLUETOOTH".
• If a Bluetooth device is already connected, disconnect
®
it.
1
Press [PLAY MENU] repeatedly to select
"LINK MODE".
2
Press [2, 1] to select the mode and then press
[OK].
MODE 1: Emphasis on connectivity
MODE 2: Emphasis on sound quality
Note:
• Select "MODE 1" if the sound is interrupted.
• The factory default is "MODE 2".
Bluetooth
If the sound input level from the Bluetooth
low, change the input level setting.
Preparation
• Connect a Bluetooth
1
Press [PLAY MENU] repeatedly to select "INPUT
LEVEL".
®
2
Press [2, 1] to select the level and then press [OK].
"LEVEL 0"
^---------------------------------------------J
device has touched
®
Note:
• Select "LEVEL 0" if the sound is distorted.
• The factory default is "LEVEL 0".
Disconnecting a Bluetooth
device.
®
1
While a Bluetooth
Press [PLAY MENU] repeatedly to select
"DISCONNECT?".
2
Press [2, 1] to select "OK? YES" and then press
[OK].
Note:
• You can also disconnect the Bluetooth
and holding [
• The Bluetooth
audio source (e.g., "CD") is selected.
Bluetooth
When "SC-PMX70" is selected from a paired Bluetooth
device's Bluetooth
automatically from standby mode and establish a
Bluetooth connection.
®
1
Press [SETUP] repeatedly to select
"BLUETOOTH STANDBY".
2
Press [2, 1] to select "ON" and then press [OK].
Note:
• To turn the function off, select "OFF" in step 2.
• The factory default is "OFF". If this function is set to "ON",
the standby power consumption will increase.
input level
®
device is too
®
device.
®
,. "LEVEL i1" ,. "LEVEL i2"
device
®
® device is connected:
® device by pressing
-PAIRING] on the unit.
® device will be disconnected if a different
standby
®
menu, this unit will turn on
®

Media information

• Please be aware that Panasonic accepts no
responsibility for the loss of data and/or information.
Compatible iPhone/iPad/iPod
iPhone 6 Plus / iPhone 6 / iPhone 5s / iPhone 5c /
iPhone 5 / iPhone 4s / iPhone 4 / iPhone 3GS /
iPhone 3G / iPhone
iPad Air 2 / iPad Air / iPad (3rd and 4th generation) /
iPad 2 / iPad / iPad mini 3 / iPad mini 2 (iPad mini
with Retina display) / iPad mini
iPod touch (1st through 5th generation)
iPod nano (2nd through 7th generation)
Note:
• Do not connect models not listed in the above. Unexpected
behaviour may occur.
• Compatibility depends on the software version. Update
your iPhone/iPad/iPod to the latest software before using it
with this unit.
• Read the User Guide of the iPhone/iPad/iPod for the
operating instructions.
®
(as of December 2014)
7