NETGEAR GA620 Reference Manual page 36

Reference Guide for the Model GA620 Gigabit Ethernet Card
Press the arrow keys to highlight Save parameters and load driver, and then press
15.
[Enter].
If this is the first Gigabit Ethernet driver loaded onto your server, you may be prompted to
accept a randomly generated IPX number. Only accept or enter a new number for frame types
used on your network. Press [Esc] to reject numbers you do not want to use.
Click on No when prompted to indicate if you want to select another driver.
16.
Press [Esc] to exit the NetWare installation program.
17.
You might have to press the Escape key a few times in order to return to the main installation
menu before you can exit to the NetWare prompt.
The Novell monitor program and the config command are useful for verifying driver
configuration. For more information, refer to the Novell NetWare manuals.
Get to the DOS prompt and enter:
18.
server_name: down
server_name: exit
The install program adds load and bind statements to the autoexec.ncf file.
Verify the entries in the autoexec.ncf file and, if necessary, edit them.
19.
Although it is possible to manually edit the autoexec.ncf file, NetWare configuration is usually
performed through the inetcfg program. To access this program, enter load inetcfg at the
NetWare server prompt. For further information, refer to the Utilities Reference in your Novell
NetWare 4.11 online documentation.
4-8 Novell NetWare Driver Software