Connecting An Audio Receiver - Mitsubishi Electric LT-3050 Owner's Manual

Connecting an Audio Receiver

Note: The TV side panel and connections shown here are for reference only and may vary by model.
Stereo Audio System
(recommended for shelf units or A/V receivers without
digital audio inputs)
(Figure 7)
1. Connect the audio cables from AUDIO
OUTPUT on the TV side panel to TV IN or AUX
IN terminals on the back of the audio system.
• The red cable connects to the R (right) channel
• The white cable connects to the L (left) channel
2. Turn off the TV's speakers through the AUDIO/
VIDEO SETTINGS Menu, page 50.
3. Set the audio system's input to the TV or AUX
position to hear the TV's audio through your
stereo system.
Additional connection cables are not provided
with the TV. They should be available at most
electronic stores.
A/V Receiver
(Figure 8)
1. Connect either a video cable or a S-Video cable
(but not both) from VIDEO MONITOR OUT on
the back of the A/V receiver to VIDEO INPUT-1
or INPUT- 2 on the TV side panel.
2. Connect a set of audio cables from AUDIO
OUTPUT on the TV side panel to AUDIO TV
IN on the back of the A/V receiver.
• The red cable connects to the R (right) channel
• The white cable connects to the L (left) channel
LT3050_OG_v5.ind 17
�
����� ������ ���� ����� �������
�
�� ��� ���� � ����
�� �� �� ��� �� ���
�
�����
�
�
���
Figure 7. Connecting the Stereo Audio System.
These types of audio connection do NOT support
multi-channel digital audio. Please refer
other devices Owner's Guide to verify.
�� ���� ����� � ����
���
�
�����
������
�
�������
Figure 8. Connecting the A/V Receiver.
Note:
Please see your A/V receiver Owner's Guide for more
detailed connections.
04.1.23, 11:43 AM
�� ���� ����� � ����
���
�����
���������
���
������
to your
�� �������� ����� ����� ��������
�
�����
���
�
������
����
���
�����
����
17