Connecting An Antenna To A Cable Box And Vcr; Connecting Audio Components To A Cable Box Or Vcr - Mitsubishi Electric LT-3050 Owner's Manual

Connecting an Antenna to a Cable Box and VCR,

Connecting Audio/Video to the Cable Box or VCR
Note: The TV side panel and connections shown here are for reference only and may vary by model.
�� ���� ����� �������� �������
�
�
�
�
Figure 5. Connecting the VCR with cable box.
�� ���� ����� � ����
���
�
�����
��� ���� �����
��
�����
�
�������
���
���
Figure 6. Connecting the VCR Audio/Video.
16
LT3050_OG_v5.ind
����� ��� ���� ���������
�������� �����
�
��� ��
��� ���� �����
����� ��� ����� �� ����� ���
��
� � �����
������� �
� �
� � � � � � �
� �
���
������������ �� ����������
������ ����
�
��� ����� ����
�� ���� ��� ��� � �����
������� �� �� ������
������� ��� �� ����
����� �� ����� ���
����� ���
� � �����
�
� �
�������
�
�
16
Cable Box
(Figure 5)
1. Connect the incoming cable to ANT on the TV
side panel.
NOTE: For best performance, please see Composite
Video with Audio or S-Video with Audio,
below.
Composite Video with Audio or S-
Video with Audio (Recommended)
(Figure 6)
1. Connect a video or a S-Video cable from VIDEO
OUT on the VCR back panel to VIDEO or
S-VIDEO, INPUT-1 or INPUT-2 on the TV side
panel.
2. Connect a set of audio cables from AUDIO OUT
on the VCR back panel to AUDIO INPUT-1 or
INPUT-2 on the TV side panel.
�
• The red cable connects to the R (right) channel
������ • The white cable connects to the L (left) channel
����
���
�����
����
If your VCR is mono (non-stereo), connect only the
�
white (left) cable.
You may connect to the S-VIDEO or VIDEO
terminal but not to both.
04.1.23, 11:43 AM