Appendix A: Bypassing The Parental Lock - Mitsubishi Electric WD-57831 Owner's Manual

Appendix A: Bypassing the
Parental Lock
IMPORTANT
Cut along the dotted line and file bypass
instructions in a safe place for future
reference.
Bypassing the Parental Lock
After you set the lock, you must use your pass code to
view a locked program, view the locked TV, cancel the
lock, or enter the Parental Lock menus.
If you forget your pass code, you can view the locked TV
without entering your pass code. When you are prompted
for your pass code, press the number 9 and QV buttons
on the TV remote control at the same time. This process
temporarily unlocks the TV
When entering the Parental Lock menu, this process
deletes your old pass code and prompts you to enter a
new pass code.
• You can either enter a new pass code to open the
Parental Lock menu and make changes or press EXIT to
close the menu.
• If any of the locks are turned on and you exit the
menus when prompted for a new code, the old code
and all lock settings are retained.
• If all locks are turned off and you exit the menus when
prompted for a new code, then the previous code is
erased.
IMPORTANT
When changing or deleting your pass code,
you must use the remote control included
with this TV. You cannot use a Mitsubishi
remote control from another component or a
"universal" remote.
Appendices
95