Setup Menu; Netcommand Menu - Mitsubishi Electric WD-57831 Owner's Manual

62
Chapter 5. TV Menu Settings

Setup Menu

See chapter 3, "TV Setup," for use of the Setup menu.

NetCommand Menu

The features described in this section are available even if
you have not performed NetCommand setup. See chapter
3, "TV Setup," for options available for NetCommand-
controlled devices.
Review TV Connections
(no NetCommand setup required)
Press to highlight Review and press ENTER to
display the Review screen (see figure 2).
Figure 2. The Review screen lists all TV connections.
IEEE 1394 inputs are listed separately on the right.
Input Name Menu
(no NetCommand setup required)
Use the Input Name menu to assign useful labels to the
TV inputs that appear in the Input Selection menu. See
figures 3 and 4. The current viewing device and any
unused inputs appear grayed out and unselectable in the
Input Name menu.
Icon for the Input Name menu
Figure 3. The Input Name menu and Icon Order menu are
accessible through the NetCommand menu.
Icon for the Icon Order menu
Figure 4. Input Name menu
To rename an input
1. If you are currently watching the input you wish to
rename, first change to another input. To do so, press
INPUT to open the Input Selection menu, highlight a dif-
ferent input, and press ENTER.
2. With the Input Name menu displayed, press
move the highlight to the box for the input you wish to
rename.
3. Press to select from the following list.
Cable Box
Camcorder
DVD
DVD2
DVR (digital video
recorder, recordable DVD)
Only one VCR label is available, so If you have a
second VCR connected, leave the name as the default
name.
To Replace One Device with Another on an Input Jack
1. Disconnect the device you wish to remove from the
TV.
2. Connect the new device to the vacated jack.
3. Open the Input Name menu from the NetCommand
menu.
4. Select a device name from the list for the input.
5. Open the Review screen and confirm the change.
To Remove the Icon for an HDMI Device
When you disconnect an HDMI device, the icon remains in
the Input Selection menu until you choose to remove it.
1. In the Input Name menu (see figure 4), highlight the
box for the disconnected HDMI input.
2. Press to select Off.
3. Press MENU to return to the NetCommand menu or
press EXIT to close all menus.
IMPORTANT
It is possible to use the same name for more
than one input. To avoid confusion, be sure
to use different names for each input.
to
Game
HD Disc
Satellite
VCR