Mitsubishi CS-35405 Owner's Manual page 93

Important:
Important:
While the PIP image is on the screen:
• The PIP function buttons (SOURCE, CHANNEL, ENTER, left/
right, adjust up/down, PAUSE) will all work as they do with
standard PIP.
• The PIP CHANNEL button (on the lower right ]portion of th_,
remote control) will automatically control the small PIP image.
The standard CHANNEL button and the number buttons (0--9)
change channels on the main image.
When you press the PIP button on the remote to turn offthe PIP
image:
• CHANNEL, the number buttons, and all other functions will[
work normally again.
If you leave the TV turned on, set to Input-l, but the TV is not
receiving a signal on Input-l, it will automatically turn off after
two and a half minutes. (If you use a TV menu during this time., the
TV will turn off two and a half minutes after you sl;op using the
menus.)
If the TV automatically turns off because of the situation described
above, it will return to the last channel you viewed on Antenna-A
or Antenna-B when you turn the TV back on.
Using the Active A/V Network Feature 91