Of Vcrs - Mitsubishi CS-35405 Owner's Manual

Using the remote control to operate cable boxes
and other brands of VCRs (cont.)
If your cable box is
•..enter this code ...enter this code
this brand..•
%_com
Panasonic
Macom
Philips
If your cable box is
this brand...
Zenith
Hamlin
Jerrold
G.I.
Oak
Pioneer
Scientific Atlanta
51
52, 53, 69
54, 57, 58, 59, 60, 85, 87
55, 56
61, 62, 82
64, 65, 84
66, 86, 88, 89, 91, 92
Regency
67,68,72
63,70
71
73,74,75,76,77,
93,94,95,96,97,98,99
79
_>Important:
_>Lmportant:
Sometimes manufacturers will change their products, or they may
use more than one code. If this is the case, your remote may not be
able to operate your VCR or cable box
Each layer (CABLE, VCR-A, or VCR-B) can be set for either a cable
box or a VCR.
_Important: When you replace the batteries in your remote control, the remote
will return to its initial setting.
using your remote control to operate your VCR
After you have set up your remote control for your particular brand
of VCR, you can use the remote to operate your VCR.
O Use the select buttons across the top of the remote control to
choose the layer you "set up" to operate the VCR: VCR-A,
VCR-B, or CABLE.
Point the remote control at the VCR and press the desired
buttons.
If you are using a Mitsubishi VCR, you will be able to use all of the
buttons on the remote control to operate yore' VCR except for
MUTE, VOLUME and the PIP flmction button,;, which will always
operate the TV itself.
If you are using another brand o:f VCR, you can use the POVYER,
CHANNEL, REC, STOP, PAUSE, REW, PLAY and FF buttons to
operate your VCR.
46 Chapter 3: Operating Your TV