Using The Active A/V Network Feature - Mitsubishi CS-35405 Owner's Manual

Using the Active AN Network Feature
Important:
The A/V Network is a special feature that makes it easier to use
your TV and your other A/V components together. When you
connect the A/V Network, you can point the remote control at the
TV, and it will "pass" the remote control command to the other
components.
Additionally, you will gain even more benefits if you have a Mitsu-
bishi VCR equipped for the Active A/V Network. The Active A/V
Network allows you to perform many of the commonly used fea-
tures of your system at the press of just one button.
This section will explain the various features of the Active A/V
Network.
before you begin
You must have connected an A/V Network cable from the Active
AFV Network terminal of your TV to the A/V Network IN
terminal of your VCR. See "TV + Mitsubishi products that have
Arv Network terminals," page 38.
• You must have connected your VCR to Input-1 of your _.
• You must have set your TV's "A/V Network" setting to "Active"
or "Basic." See "Setting the A/V Network," ]page 58.
• Your VCR's remote control switch (if any) should be set to
'_VCR-A."
• Your VCR's video mute setting should be turned ON.
what the Active A/V Network does
The Active A/V Network makes it easier and fiaster to use the
VCR's Quick Program and Play commands and the TV's PIP
commands.
When using the Active A/V Network, you should always point your
remote control at your TV.
Using the Active A/V Network Feature 89