Descaling - Saeco Vienna Plus Sup 018M Operating Instructions Manual

DESCALING - DISPOSAL
cycle has been carried out to the end. Never use
vinegar as a descaling solution.
Before descaling, remove the pannarello from the
steam spout as described in the "Cleaning and Main-
tenance" section.
1 Pour the entire Saeco concentrated descaling solu-
tion into the appliance water tank and fill the tank
with fresh water.
2 (Fig.26) - Turn on the appliance and dispense 2-3
cups of water through the steam wand (12) (ap-
proximately 150 ml).
3 Switch off the main power button (5) of the appli-
ance.
4 Let the descaling solution sit for 15-20 minutes.
5 Repeat steps 2 and 3 at intervals of 3 minutes,
until there is no descaling solution left in the water
tank.
6 (Fig.25) - Rinse the water tank with clean water and
fill it again.
7 (Fig.26) - Rinse the appliance circuits with fresh
water until the tank is empty, by dispensing the
water through the steam wand (12).
8 Repeat the rinse cycle (step 6 and 7) twice con-
secutively.
When descaling is complete, insert the pannarello
into the steam spout as described in the "Cleaning
and Maintenance" section.
Saeco descaling solution should be di-
sposed of according to the manufacturer
instructions and/or the regulations in the country
of use.
12 DISpOSAL
This product complies with EU Directive 2002/96/
EC.
The symbol on the product or on its pack-
aging indicates that this product may not be treated
as household waste. Instead it shall be handed over
to the applicable collection point for the recycling of
electrical and electronic equipment.
By ensuring this product is disposed of correctly, you
will help prevent potential negative consequences
for the environment and human health, which could
otherwise be caused by inappropriate waste handling
of this product. For more detailed information about
recycling of this product, please contact your local city
office, your household waste disposal service or the
shop where you purchased the product.
15