System 4 Home Theater Ir Control - Mitsubishi WS-65908 Owner's Manual

Remote Control Functions: System 4 Home Theater IR Control
Requirements for Operation
A/V devices connected as described on page 15.
Cable Box connected as on page 16 or Cable Box with an S-Video output conneced as
on page 19, Connecting an S-Video Device.
TV connected to A/V receiver (TV Monitor Audio Out To A/V Receiver TV Input).
TV Inputs renamed (see page 33 for naming help):
Cable Box connected to Ant A or B
Cable Box connected to STB
VCR conneceted to Inputs 1-4
DVD conncected to any Input
Satellite Receiver connected to any Input
Digital Television Receiver on HD Input
Remote Control programmed to operate your other A/V Devices by System 4 properly
activated (see pages 28-29).
IR emiters properly connected and placed (see page 22).
System 4 allows for only one of the
following:
• Cable Box
• Satellite Receiver
• Digital TV Receiver
Operation
(VCR as example)
To watch your VCR:
1 Turn on the TV and A/V Receiver.
2
Move slide switch to VCR.
3
Point remote at the TV and press the HOME THEATER button.
4 The TV and A/V Receiver should change to the appropriate inputs.
5
Operate the VCR.
Other commands from your Mitsubishi
remote control, or other manufacturer's
remote, will be passed through the TV.
= Cannot be Renamed
= Rename To Cable
= Rename To VCR
= Rename To DVD
= Rename To DBS
= Cannot Be Renamed
Part IV: Operation
53
53