L2Tp Vpn; Chapter 12 L2Tp Vpn; Overview; The Setup Screen - ZyXEL Communications LTE7410 User Manual

12.1 Overview

L2TP VPN tunnels network traffic between the LTE Device and a peer device or server over the
Internet.

12.2 The Setup Screen

Use this screen to view and manage L2TP VPN tunnels. Click Security > L2TP VPN to open the
following screen.
Figure 64 Security > L2TP VPN
The following table describes the labels in this screen.
Table 34 Security > L2TP VPN
LABEL
#
Active
Default Route
Tunnel Name
L2TP Server IP
User Name
Auth
Modify
C
DESCRIPTION
This shows the index number of an L2TP tunnel.
This shows whether the L2TP VPN is on or not.
This shows the default route is on or not.
This shows the name of this tunnel.
This shows the IP address of the remote gateway with which the LTE Device establishes
the L2TP tunnel.
The remote user must log into the LTE Device to use the L2TP VPN tunnel. This shows a
user or user group that can use the L2TP VPN tunnel.
Select the protocol (EAP, MSCHAPv1 or MSCHAPv2) the LTE Device uses for user
authentication.
Click the Edit icon to go to the screen where you can edit the L2TP VPN tunnel.
LTE7410 User's Guide
87
HAPTER

L2TP VPN

1 2