Phone Screen - ZyXEL Communications LTE7410 User Manual

Table 41 SIP Account: Edit (continued)
LABEL
Active No Answer
Forward
Hot Line / Warm
Line Enable
Warm Line
Hot Line
Hot Line / Warm
Line number
Warm Line
number
Active
Anonymous Call
Block
OK
Back

14.4 Phone Screen

Use this screen to maintain settings that depend on which region of the world the LTE Device is in.
To access this screen, click VoIP > Phone.
Figure 72 VoIP > Phone
Each field is described in the following table.
Table 42 VoIP > Phone
LABEL
Region Setting
Call Service Mode
Apply
Cancel
Chapter 14 VoIP
DESCRIPTION
Select this if you want the LTE Device to forward incoming calls to the specified phone
number if the call is unanswered. (See No Answer Time.)
Specify the phone number in the To Number field on the right.
Select this to enable the hot line or warm line feature on the LTE Device.
Select this to have the LTE Device dial the specified warm line number after you pick up
the telephone and do not press any keys on the keypad for a period of time.
Select this to have the LTE Device dial the specified hot line number immediately when
you pick up the telephone.
Enter the number of the hot line or warm line that you want the LTE Device to dial.
Enter a number of seconds that the LTE Device waits before dialing the warm line number
if you pick up the telephone and do not press any keys on the keypad.
Select this to have the phone not ring for incoming calls with caller ID deactivated.
Click this to save your changes.
Click this to exit this screen without saving.
DESCRIPTION
Select the place in which the LTE Device is located.
Select the mode for supplementary phone services (call hold, call waiting, call
transfer and three-way conference calls) that your VoIP service provider supports.
• Europe Type - use supplementary phone services in European mode.
• USA Type - use supplementary phone services American mode.
You might have to subscribe to these services to use them. Contact your VoIP
service provider.
Click this to save your changes and to apply them to the LTE Device.
Click this to set every field in this screen to its last-saved value.
LTE7410 User's Guide
103