Chapter 4. Software Configuration; Tcp/Ip Configuration - TP-Link TC-7610 User Manual

Docsis 3.0

Hide thumbs Also See for TC-7610:

Table of Contents

Chapter 4. Software Configuration

This User Guide recommends using the "Quick Installation Guide" for first-time installation. If you

want to know more about this device, maybe you will get help from this chapter to configure the

advanced settings through the Web-based Utility.

The default IP address of the TC-7610 DOCSIS 3.0 Cable Modem is 192.168.100.1. And the

default Subnet Mask is 255.255.255.0. we use all the default values for description.

Connect the local PC to the LAN port of the modem. And then you can configure your PC in the

following way.

Set up the TCP/IP Protocol in "Obtain an IP address automatically" mode on your PC.

If you need instructions as to how to do this, please refer to

PC.

Then the built-in DHCP server will assign IP address for the PC.

Now, you can run the Ping command in the command prompt to verify the network connection.

Please click the Start menu on your desktop, select run tab, type cmd or command in the field

and press Enter. Type ping 192.168.100.1 on the next screen, and then press Enter.

If the result displayed is similar to the screen below, the connection between your PC and the

modem has been established.

If the result displayed is similar to the screen shown below, it means that your PC has not

connected to the modem.

TC-7610

DOCSIS 3.0 Cable Modem User Guide

Appendix C: Configure the

Table of Contents

Show Quick Links

Table of Contents