Installing Client Software
How to install the client software such as the printer driver from the Software DVD-ROM co-packed with the equipment is
described as follows.
Installing the printer drivers by using Software Installer
•
Please refer to the following guides to connect with a USB cable:
& Software Installation Guide (PDF): "Chapter 2: INSTALLING PRINTER DRIVERS FOR WINDOWS"
•
To complete this procedure, you must be logged in as an administrator.
1 1
Check that your machine and the computer are turned on and connected, and then insert
the "Software DVD-ROM" into the computer.
2 2
Click [Run Setup.exe] after [AutoPlay] is displayed.
If the [User Account Control] dialog box is displayed, click [Yes].
3 3
Select the language.
4 4
Select the device of your machine, and then click [Next].
Installing Client Software
1
17