Mitsubishi G-50A Operating Manual page 14

1.4.3 Starting the On-Line Monitor(G-50 connection)
* To use the maintenance tool via G-50 (Network), license registration for the G-50 to be used is necessary.
Purchasing the license No. for each G-50 to be used, conduct the license registration through the Web
browser (http://[IP address of the G-50A]/ administrator.html). After selecting "Maintenance tool" of the
optional function on the Web Browser Screen displayed, enter the purchased license No..
For the detail of the license registration, see Chapter 4 [Registering a License for Optional Functions] of
Central Controller Model: G-50A Web Browser Operation Manual (For manager).
* To use the maintenance tool via G-50 (Only for LAN mode and Dialup connection mode), please check a
setup of Internet Connection Firewall of PC. If the FIREWALL function is used, communication will be
normally impossible with G-50A, and normal data will not be displayed.
For detail, please refer to [6. How to change setting of Firewall] on Page 57.
In the case of permanently installing an anti-virus software and always started under this environment, the
fire wall function of this software may be activated sometimes. In such case, The normal communication with
G-50 will be hindered not displaying data normally. When operating Maintenance Tool, finish the anti-virus
software once or remove the fire wall function.
1.4.3.1 In case for local connection
In the case when on line monitoring is applied to air conditioning system via G-50 by connecting the
maintenance tool to LAN locally.
(1) Clicking "G-50(Network)" on the selection screen of
Monitor mode selects "Local connection" simultaneously.
Last click "
(2) Next IP address input screen is displayed. Here,input IP
address of G-50A connected to the air conditioning
system of which operating information is desired to
monitor, and click on
Request
It is required to set to the IP address in the same system with
G-50 to be connected to Maintenance Tool PC from
[Control Panel].
."
.
13