Owner's instruction
Fan Mode
❊
When operating in wind mode, the outdoor compressor doesn't work.
❊
FAN operation doesn't bring out cold air but air from regular fan comes out.
30 Wide Wired Remote Controller
1
Press
button to turn on the
indoor.
2
Press
button.
3
Press the
button to select
airflow rate SLO ¡ LO ' MED ¡
HI ¡ (NONE) ¡
(The lists depends on products function)
Temperature setting/ room temperature check
Owner's instruction
1
We can simply adjust the desired
temperature.
• Press the
buttons to adjust the
desired temperature.
: Increase 1˚C or 2˚F per one time
pressing
: Decrease 1˚C or 2˚F per one time
pressing
Room temp: Indicate the current room
temperature.
Set temp: Indicate the temperature that
user want to set.
Depend on what kind of controller, the
desired temperature can be adjusted at
0.5˚C or 1˚F.
Cooling operation: The cooling mode
doesn't work if
desired temperature
is higher than room
temperature Please
lower the desired
temperature.
Heating operation: The heating mode
doesn't work if
desired temperature
is lower than room
temperature Please
increase the desired
temperature.
2
Whenever press
button, the room
temperature will be displayed within 5
seconds.
After 5 seconds, it turns to display the
desired temperature.
Because of location of remote controller,
the real room temperature and the this
displayed value can be different
Owner's & Installation Manual 31