Making And Answering Calls; Answering A Call; Identifying A Caller; Refusing A Call - Mitel NETVISION PHONE User Manual

MAKING AND ANSWERING CALLS

Answering a Call

You can program your NetVision Data Phone to answer calls in one of three
ways:
Auto-Answering automatically answers the call after one ring.
One-Key Answering requires you to press SND to answer a call.
Any-Key Answering allows you to use any key but END or HOLD to
answer a call.
To select an answering mode:
1. Press MENU.
2. Use the scroll keys (*<, >#) or the Vol buttons to select Phone Answer.
3. Select the desired mode.
To cancel your selection, press END.

Identifying a Caller

While in a call, the phone can display either the caller's number or name (if
available) but not both at once.
To alternate between the caller's number and name:
Press NAME.

Refusing a Call

To refuse an incoming call:
Press END.
NOTE: Holding down the END key for two seconds turns off the phone.
-9-