Handset Clock Settings - AT&T E2520 User Manual

91-000020-021-000-E2520 Manual-ENG.qxd
Select MENU.
HANDSET 1
REDIAL MENU MEM
Select SET TIME.
HANDSET SETTINGS
SET TIME
CLOCK MODE
REGISTER
^ V
OK
Enter time, press AM/PM, then SAVE.
SET TIME
12:00 AM
<
SAVE AM/PM
To turn clock on or off.
CLOCK ENABLE
ON
OFF OK ON
2/13/1950
Telephone Operation

Handset clock settings

To set time
Follow steps at left to set the handset clock time. Use
the keypad to enter four digits (i.e., 09:15), then press
to toggle the display between AM and PM.
AM/PM
When the correct time is displayed, press
NOTE: You can choose to set the time manually, or
you can allow it to be set automatically with incoming
Caller ID information. The time will be set automatically
only if you subscribe to Caller ID service provided by
your local telephone company (see page 5).
To turn clock on or off
The handset time display is optional. To turn it on or
off, select , press
MENU
highlighted, then press
OK
Press or buttons to enable or disable the clock
ON OFF
display, then press .
OK
15 15
7:21 PM Page 15
SAVE
V
until
CLOCK MODE
.
.
is