Displaying Reports - Mitel 5020 IP User Manual

Displaying Reports

You can display queue status reports for your agent group. Refer to Table 3 in
the Reports and Indicators section for a list of the available queue status reports.
If you're responsible for more than one agent group, you can also access agent
status reports using the AGENT softkey. Refer to Table 4 in the Reports and
Indicators section for a list of the available agent status reports.
To display queue status reports:
1. Press a QUEUE STATUS key.
2. Press a key on the dial pad.
The report associated with that key is displayed.
3. Press SUPERKEY to exit.
To display agent status reports:
1. Press a QUEUE STATUS key.
2. Press AGENT.
The status of the first agent in the group is displayed. The AGENT softkey
is only available if you supervise more than one group.
3. Press a key on the dial pad.
The report associated with that key is displayed.
4. Press SUPERKEY to exit.
12