Listening To Cds - Teac CR-H101DAB Reference Manual

Playing a CD
1
Hold the disc by its edges with the labeled side up and
insert it partway.
2
Push the disc in further until just before it disappears.
It will automatically be drawn in to the slot.
If a disc becomes caught or is otherwise difficult to insert, do not
push it in forcefully. Press the eject (-) button and remove the
disc once before trying to reinsert it. (Pushing a disc forcefully could
damage the unit.)
3
Press the play/pause (7/9) button.
During playback, PLAY appears at the top of the display.
o If CD Auto Start is ON when a CD is loaded, the playback source
will be set to CD and playback will start automatically (page
38).
Pausing playback
Press the play/pause (y/9) button to pause playback.
To resume playback from the position where it was paused, press the play/
pause (y/9) button again.
When paused, PAUSE appears at the top of the display.
Stopping playback
Press the stop/eject (8/-) button to stop playback.
Ejecting a disc
When CD playback is stopped, press the stop/eject (8/-) button.
Press to partially eject the disc. Hold the disc by its edges and pull it out.
o Pressing the stop/eject (8/-) button will eject the disc regardless of
the selected playback source.
Skipping to search for a track
Press a skip (.//) button to skip to the previous or next track. Keep
pressing until you reach the track you want.
o During playback, press the . button once to return to the begin-
ning of the current track. When you want to play an earlier track, press
the . button repeatedly until you reach that track.
o During program playback, tracks from earlier or later in the program
will be played back.

Listening to CDs

23