Setting Line Ring Type And Delay - LG-Nortel IP8830 User Manual

To set the ring type for the phone:
Press the Setting (
o
Dial 3, or move the cursor to
o
OK
softkey.
Dial 2, or move the cursor to
o
softkey.
Dial 1, or move the cursor to
o
Previous-Next
the
asterisk, , displays in front of the current setting.
Select the ring type using the
o
softkey to hear the selected tone.
OK
Press the softkey to save the selected the ring type.
o
Move to another parameter with the navigation buttons and
o
continue the session or press the Setting (
the configuration session.

5.2.2. Setting Line Ring Type and Delay

You can assign each line with a different ring type (tone) to distinguish which line is ringing. Selections
for the type include one of up to fourteen tones, "Ringer Off" or "Set to Default", see
fourteen tones, five are permanently stored in the memory of the phone and the remaining five must be
downloaded before use. In addition, for each line the ring signal can be immediate or delayed. The delay
is set in 1 second increments from 0 (no delay) to 10 seconds.
To set the ring type for a line:
Press the Setting (
o
Dial 3, or move the cursor to
o
OK
softkey.
Dial 2, or move the cursor to
o
softkey.
Dial the Line number plus one (2 for Line 1, 3 for Line 2,
o
etc.), or move the cursor to
Previous-Next
softkeys and press the
n
value of is the Line button number.
Dial 1, or move the cursor to
o
Previous-Next
softkeys and press the
the line number displays in parenthesis after "Ring Type".
Select the ring type using the
o
softkey to hear the selected tone. An asterisk,
in front of the current setting.
OK
Press the softkey to save your entry.
o
Move to another parameter with the navigation buttons and
o
continue the session or press the Setting (
To set delayed ring for a line:
Press the Setting (
o
) button.
3.Phone Settings
2.Ring Setting
1.Default Ring Type
softkeys and press the
Next
softkey. Press the
) button.
3.Phone Settings
2.Ring Setting
n
Line Configuration
OK
1.Ring Type
OK
Next
softkey. Press the
) button.
14
IP8830 Broadworks IP Phone
Previous-Next
using the
Previous-Next
using the
using
OK
softkey. An
Ring Setting
>1.Default Ring Type
Play
Default Ring Type
*Type1
) button to exit
Previous-Next
using the
Previous-Next
using the
Ring Setting
using the
>2.Line 1 Configuration
softkey. The
using the
softkey. Note
Line 1 Configuration
>1.Ring Type
Play
, displays
Ring Type (1)
*Set to Default
) button to exit the configuration session.
User Guide
softkeys and press the
softkeys and press the
Previous Next
Play Next
section 5.2.1. Of the
softkeys and press the
softkeys and press the
Previous Next
Previous Next
Play Next
OK
08:30
OK
08:30
OK
OK
08:30
OK
08:30
OK
08:30
OK
Dec. '08