AT&T 959 User Manual page 10

Wall Installation
continued from page 7
3 Reverse the handset tab.
This tab holds the handset when you hang up. Hold down the
switchhook, and slide the tab up and out of its slot. Turn the tab
so that the end with the "hook" is up. Then insert the tab back
into its slot.
Switchhook
Handset tab
4 Connect the line cord to a modular wall jack and mount
the phone on the wall jack.
Make sure the cord snaps firmly into place. Place the phone
on the wall jack mounting studs and pull down until it is held
securely.
5 Follow Steps 4-5 in "Table/Desk Installation" on page 6.
8