Symbols Used; Tools Required; To Be Provided By Customer - Panasonic Aquarea WH-MDF06E3E5 series Installation Manual

Aquarea air/water heat pump – heating and cooling systems
Hide thumbs Also See for Aquarea WH-MDF06E3E5 series:
Table of Contents

Advertisement

Introduction
Symbols used | Tools required

1.4 Symbols used

Danger!
Danger!
Warning!
NOTE

1.5 Tools required

1.6 To be provided
by customer
1 – 6
The warnings in this manual absolutely must be heeded, as they are
safety-critical. The symbols have the following meanings:
Danger of fatal injury from electric shock if not observed
Danger of fatal injury or damage to health if not observed
Material damage if not observed
Further information
We recommend that you use the following tools:
Phillips-head screwdriver
Spirit level
Electric drill
Set of spanners
Knife
The following components must be provided by the customer:
2-way directional valve set
3-way directional valve set
Analogue room thermostat (e.g.
RAA20 Siemens) or program-
mable room thermostat
(e.g. REV200 Siemens)
Anchoring to prevent tipping over
Dirt trap (mesh width at least
500 to 600 μm)
Aquarea air/water heat pump – Installation manual for compact systems 03 / 2013
Tape measure
Multimeter
Torque wrench, 39.2 Nm
Torque wrench, 58.8 Nm
Gas leak detector
Propylene glycol antifreeze
mixture
the wired remote control
Heating circuit mixer closed-
loop control
Dew point monitor
Device for draining the system
Insulation for pipelines

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents