Opening the device
5 Opening the device
Danger!
1
Fastening screws
1
1
Fastening screws
1
5 – 16
Ensure that the device is disconnected from the power supply before
you perform the steps listed below.
Remove the front panel
Remove the 5 fastening screws
Push the front panel of the cabinet downwards to release
the safety catches.
1
Pull the front panel forwards to remove it.
Removing the upper cabinet panel
Remove the 11 fastening screws.
Lift the upper cabinet panel from the device.
Reverse the steps accordingly to close the device.
Aquarea air/water heat pump – Installation manual for compact systems 03 / 2013