Basics - Kenwood KDC-X500 Instruction Manual

BASICS

Faceplate
Detach button
Attach Detach
To
Turn on the power
Adjust the volume
Select a source
Change the display information
* For
: The power will automatically turn off after 20 minutes when in standby mode (Auto Power Off).
JS_KWD_KDC_X500_KW_EN_10_FF.indd 3
Volume knob Display window
USB cable from the rear of
the unit
How to reset
On the faceplate
Press .
• Press and hold to turn off the power.*
Turn the volume knob.
Press repeatedly.
Press DISP repeatedly. ( 25)
:
Press the switch twice
within 5 seconds after
detaching the faceplate.
Remote control (RC-406) (
supplied for
)
Remote sensor (Do not
expose to bright sunlight.)
Remote control functions are not available for
.
How to replace the battery
On the remote control
Press and hold SRC to turn off the power.
( Pressing SRC does not turn on the power. )
Press or .
Press ATT during playback to attenuate the sound.
• Press again to cancel.
Press SRC repeatedly.
( Not available )
/
Pull out the
insulation sheet
when using for the
first time.
3
ENGLISH
12/10/2015 10:21:29 AM