Advertisement
step
To begin installation, shut down your computer.
1
Connect the Comwave Internet Modem using a standard
step
2
cable wire (not supplied) to the wall jack.
step
Connect the supplied Ethernet Cable from the LAN port of
3
the Comwave Internet Modem to your computer.
step
(For Home Phone)
4
from the LAN port of your Comwave Internet Modem to
the WAN port of the Home Phone Adapter.
step
Connect the Comwave Internet Modem to a power outlet.
5
Note:
Wait until the
Internet Modem indicate that the Modem is operational.
This may take up to 5 minutes.
step
(For Home Phone)
6
port on the Home Phone Adapter.
Then connect power to the Home Phone Adapter and wait
5 minutes for dial tone.
DO NOT DISCONNECT POWER
Phone Adapter.
step
Start your computer.
7
step
You should be able to browse the Internet instantly.
8
Connect the supplied Ethernet cable
LED Light Indicators
on your Comwave
Connect a telephone to the PHONE 1
as it may damage the Home
Can't access the Internet?
Unplug the power to your
1
Comwave Internet Modem,
Home Phone Adapter and shut
down your computer.
2
Wait 30 seconds and then
plug your Comwave Internet
Modem's Power Cord back
into the power outlet.
3
Wait until the LED Light
Indicators on your Comwave
Internet Modem indicate that
the Modem is operational. This
may take up to 5 minutes.
4
Start your computer and Home
Phone Adapter.
5
Open your browser and start
surfing the Internet.
6
Still unable to surf the Internet?
Call us at 1-866-210-9149.
We'll get you back
up online!
Advertisement
