Automatic; Disabled; Sound Settings; Master Sound Volume/Switch - Mio MioMap v3.2 User Manual

6.1.7.1 Automatic

The route will be recalculated automatically a few seconds after you go astray.

6.1.7.2 Disabled

If you stick to the original route, and you wish to get back to it on your own, you can
disable recalculation. This way guidance will stop until you return to the
recommended route on your own.

6.2 Sound settings

Settings on this page determine the way MioMap sounds.

6.2.1 Master sound volume/switch

The loudness of MioMap is independent of your PNA settings. When you run
MioMap, the position of this fader determines the device volume level. When you exit
the program, the device settings return.
The left part of this control works as a mute button. Tap to mute all MioMap sounds.
This works in tandem with the Mute button (Page 25) on the map screens. Switching
one of them will change the status of the other.

6.2.2 Voice guidance volume/switch

The switch on the left can turn on or mute MioMap's audible guidance (voice
instructions and speed camera warning). When turned on, the slider on the right will
adjust the loudness of voice prompts. In its leftmost position the voice guidance is
suppressed, in its rightmost position the master volume applies.

6.2.3 Key sound volume/switch

The switch on the left can turn the key sounds on or off. Key sounds are audible
confirmations of either pressing hardware buttons or tapping the touch screen. When
71