Tmc Control Centre; Selected Fm Radio Station; Exclude Selected Station; Show Excluded Stations - Mio MioMap v3.2 User Manual

Navigation software
Hide thumbs Also See for MioMap v3.2:
Table of Contents

Advertisement

Tap the arrows to turn the page, and see traffic difficulties farther away from your
current position, or press Settings to configure the TMC subsystem. This opens a
new window.

4.7.2 TMC control centre

This screen shows the selected TMC source and allows you to change the TMC
settings.

4.7.2.1 Selected FM radio station

The name and frequency of the selected radio station will appear at the top of this
window, together with signal strength information indicated by a bar similar to the
GPS satellite signal strength bars on the GPS Data screen.
If there aren't any radio stations broadcasting TMC data in your area, the receiver
keeps on searching. You will see the frequency continuously sweeping across the
FM CCIR radio band (87.5-108 MHz). When you move to an area with TMC
information, the indicator will show the frequency, and detailed information for the
TMC station.

4.7.2.2 Exclude selected station

If you wish to receive TMC data from another radio station, push this button. The
radio station will be added to the list of excluded stations, MioMap will start searching
for another TMC station, and will always skip the excluded station in the future.

4.7.2.3 Show excluded stations

This button opens the list of excluded radio stations. Tap any of the stations in the
list, then tap Enable to allow MioMap to accept TMC information from this station.
53

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mio digiwalker h610

Table of Contents