Automatic Night Colours; Warn When Speeding; Speed Warning Options; Speeding Tolerance - Mio P550 User Manual

6.1.2 Automatic Night Colours

Using the automatic night mode, Mio Map will change between the daylight and night
colour schemes a few minutes before sunrise and a few minutes after sunset based
on the time and location information provided by your GPS. Once you set a
permanent colour scheme in the Quick menu (4.6.2.3), this automatic mode turns off.
If you need Mio Map to switch between colours for you again, you need to re-enable
this feature.

6.1.3 Warn When Speeding

Maps may contain information about the speed limits of the road segments. Mio Map
is able to warn you if you exceed the current limit. This information may not be
available for your region (ask your local dealer) or may not be fully correct for all
roads in the map. This setting lets you decide whether you want to receive the
warnings or not.

6.1.4 Speed Warning Options

When speed warning is turned on, the values of these controls determine when the
warning will be triggered.
You can set two different kinds of behaviour for the warning: one is applied up to a
certain speed limit and the other one is used above that.
6.1.4.1

Speeding tolerance

Mio Map will warn you when you exceed the speed limit by the amount specified
here. Select whether you want to specify the tolerance as a Fixed value (offset to the
speed limit) or as a Percentage.
The slider will change depending on which mode you have chosen.
Both positive and negative values can be given in either offset or percentage mode.
6.1.4.2

Alternative speed limit

If the speed limit of the current road segment equals or is above this limit, the speed
warning will use the alternative tolerance instead of the previous one.
77