Focus - Point Af; Focus; Point Af - Minolta DIMAGE SCAN DUAL II AF-2820U Owner's Manual

FOCUS – POINT AF

Focus

The Dimâge Scan Dual2 uses the CCD sensor for autofocus.
Autofocus uses the center of the image to determine focus. Normally, this results in an
excellent scan because the film plane is flat. However, if the film is warped or curled, or if
Autofocus is turned off in the preferences, focus may not be accurate. In this case, the focus
adjustment should be performed again using the pont AF or Manual Focus function.
• Automatic autofocus can be turned on and off in the Preferences (page 39).

POINT AF

This allows you to use autofocus on a specific area of the
image.
1. Click on .
• The pointer will change to the Point AF icon.
• Click on the Point AF button again to escape the function.
2. Click on the area of the image to be in the sharp
focus.
• Autofocus will begin, then a new prescan will start.
• The prescanned image will appear in the Prescan window
when complete.
58