Switching The Video Signal From The Video Output Terminal - Minolta 2330 Instruction Manual

SWITCHING THE VIDEO SIGNAL FROM THE VIDEO
OUTPUT TERMINAL
As this camera has the video-out terminal, you can watch the captured images
on TV by connecting this camera to your TV with the supplied video cable.
The video output signal can be switched between NTSC and PAL.
What is an NTSC system and a PAL system ?
Both are the colour television broadcast system. The NTSC system is mainly
used in U.S.A., Japan, Canada, Mexico, the Philippines, Korea, etc. The PAL
system is used in the western Europe such as Germany, England,
Switzerland, Holland, Italy (except for France) and Australia, Singapore,
Thailand, China, etc.
As these systems have no compatibility, you cannot watch the NTSC system
based TV in the area where a PAL system is used.
This camera can switch the video output signal to both an NTSC system and
a PAL system. So you can watch the images on TV not only in your country,
but in other areas.
1
Rotate the function dial to
slide the power switch to turn on the
camera.
• The power switch returns to the initial
position.
2 Rotate the function dial to "SETUP".
• The setup mode menu is displayed on the
LCD monitor.
122
and