Quickboats foundation series User Manual page 6

6
Quickboats Foundation Series User Guide - Nov 2014
Assemble the Skipper´s Seat
IMAGE 9 a-c. The skipper´s seat has two holes and two
power transfer poles. Lock each of the power transfer
poles into the holes on the edge of the skipper´s seat by
inserting a pole into the hole and twisting clockwise. They
are locked into place when the white tongue sits firmly
within the blue groove.
IMAGE 10 a-c. Now you are ready to assemble your
Quickboat. Open the hull. Place one end of the extender
Image 8a.
bar gently into the extender bar padding located under the
gunnel (the top rim of the boat) in the middle of the hull.
Gently pull the hull apart and secure it open by placing the
other end of the extender bar into the extender bar padding
on the opposite side of the hull.
Always assemble your Quickboat starting in the following
order:
• Transom
• Motor plate
Image 8b.
• Skipper´s seat with power transfer poles
• Crew member's seat
• Foredeck with cross brace and nose cone
Image 8c.
Image 9a.
Image 9b.
Image 9c..