Quickboats foundation series User Manual page 10

10
Quickboats Foundation Series User Guide - Nov 2014
IMAGE 17 a-c. Next, click and lock the crew member's seat
into place as you did the skipper´s seat – ensuring
all four clips are properly inserted and locked into place.
As you do this you will notice the extender bar becomes
slack as the boat becomes rigid. You can now remove
the extender bar and pack this back into the boat bag.
IMAGE 18a. Take the foredeck over to the boat and line the
nose cone up with the 'bullets' at the end of each gunnel
Image 17a.
(image 18a). Slip the nose cone over each of the 'bullets'.
Ensure the cross brace clip 'tongues' are on the inside of
the hull when slipping the nose cone over the 'bullets'.
IMAGE 18 b-c. Once the nose cone is secured over
the 'bullets', click the clips on each side panel into place
attaching the foredeck to the hull.
IMAGE 19. And there you have your Quickboat. Ready
to have some fun!!
Image 17b.
Image 17c.
Image 18a.
Image 18b.
Image 18c.