Setup; Part Names And Functions; Led Indicator - Panasonic KX-HNB600AZ Systems Setup Manual

Part names and functions

A
C D E
G
Speaker

LED indicator

DC socket
LINE socket
MWi-Fi SETUPN
Used when performing initial setup.
microSD card slot
Used when inserting a microSD card.
Remove the label when inserting.
M HANDSET/LOCATORN
Used when registering a handset. You
can also press this button to locate a
misplaced handset.
M CAMERAN
Used when registering a camera.
M OTHER DEVICEN
Used when registering a sensor or smart
plug.
HNB600AZ_(en_en)_0325_ver.040.pdf
B
F
H I
11
LED indicator
You can use the LED indicator to confirm the
hub's status.
Indicator Status
Off No power, or LED
indicator is turned
off
Green, lit Normal operation,
connected to
wireless router
Green, blinking Registration mode
Green, blinking Failed to connect to
quickly wireless router
Alternating: Hub is starting up
Green, blinking (cannot be used
Yellow, blinking
yet)
Red, lit Alarm system is
armed
Red, blinking quickly Alarm system was
triggered
Yellow, lit Initial setup required
Yellow, blinking Initial setup in
progress, mobile
device connected
Yellow, blinking Initial setup is
quickly starting
*1 You can configure the hub so that its LED
indicator does not light during normal
operation. For more information, refer to
the User's Guide (page 17).
*2 It may take some time for the hub to finish
starting up.

Setup

*1
*1
*2
*1
11
2015/03/25 13:55:43