Milwaukee HAMMER-DRILLS & DRIVER DRILLS Operator's Manual page 8

For a complete listing of accessories, refer to your MILWAUKEE Electric Tool catalog. To obtain a catalog, contact your local distributor or service
center. Refer to the back cover of this operator's manual for the location nearest you.
14.4 Volt Power Plus Battery Packs
Fits MILWAUKEE Charger Cat. No. 48-59-0231, 48-59-0241 and
48-59-0245.
1.7 Amp-Hours
Catalog No. 48-11-1000
2.4 Amp-Hours
Catalog No. 48-11-1024
Power Plus Chargers 120 Volt
For charging 12-18 Volt Power Plus Battery Packs.
Fast Charger
Catalog No. 48-59-0241
1-Hour Charger
Catalog No. 48-59-0245
Jobbers Length Twist Drill Sets
13 Piece Set
Catalog No. 48-89-0030
Sizes 1/16" to 1/4" by 64ths.
15 Piece Set
Catalog No. 48-89-0020
Sizes 1/16" to 1/2" by 32nds.
21 Piece Set
Catalog No. 48-89-0015
Sizes 1/16" to 3/8" by 64ths.
29 Piece Set
Catalog No. 48-89-0010
Sizes 1/16" to 1/2" by 64ths.
1/2" Keyless Chucks
Catalog No. 48-66-1400
Catalog No. 48-66-1375
Rugged nylon housing with rust resistant nickel plated jaws and body.
For cordless drills with 1/2" - 20 thread.
Hammer-Drill Accessory Kit
Catalog No. 48-30-0101
Includes 1/4" socket driver, 6F-7R slotted bit, #1 and #2 Phillips bits, 1/4"
and 3/16" twist bits, and two 1/8" twist bits.
Plastic Carrying Case
Catalog No. 48-55-3015
page 8
ACCESSORIES
WARNING!
Always remove battery pack and lock trigger
before changing or removing accessories. Only
use accessories specifically recommended for
this tool. Others may be hazardous.
Cat. No. 48-11-1024
Cat. No. 48-30-0101
Cat. No. 48-59-0245
Cat. No. 48-89-0020