Identifying The Parts - Sony Handycam Vision CCD-TRV95 Hi8 Operating Instructions Manual

Identifying the parts

1
2
3
4
5
6
1 EDITSEARCH button (p. 20)
2 LASER LINK button (p. 53)
3 Lens cover
4 POWER switch (p. 11)
5 FOCUS switch (p. 41)
6 NEAR/FAR dial (p. 41)
7 Video control buttons (p. 21)
p STOP (stop)
0 REW (rewind)
( PLAY (playback)
) FF (fastforward)
P PAUSE (pause)
r REC (recording)
Note on the intelligent accessory shoe
Supplies power to optional accessories such as a video light or microphone. The intelligent
accessory shoe is linked to the STANDBY switch, allowing you to turn on and off the power
supplied by the shoe. Refer to the operating instructions of the accessory for further information.
To connect an accessory, press down and push it to the end, and then tighten the screw. To
remove an accessory, loosen the screw, and then press down and pull out the accessory.
If the camcorder does not work correctly with using the AC power adaptor, use the battery pack.
74
7
8 Power zoom lever (p. 14)
9 Intelligent accessory shoe
0 NIGHTSHOT switch (p. 35)
!¡ Display window (p. 81)
!™ Tripod receptacle (p. 19)
Make sure that the length of the tripod
screw is less than 6.5 mm otherwise, you
cannot attach the tripod securely and
the screw may damage the camcorder.
8
9
0
!¡
!™