Line Feed Span Commands; Esc 2 - Citizen CT-S280 Command Reference Manual

2.2.5 Line Feed Span Commands

ESC 2

Support model
[Function] Specifying 1/6-inch line feed rate
[Code]
<1B>H<32>H
[Outline] [The specification which depend on the model]
CT-S280/CT-S281/CT-S300/CT-S310/CT-P29x series
The line feed rate per line is specified by 1/6 inch.
CT-S2000/CT-S4000/CT-S801/CT-S851/CT-S601/CT-S651/CT-S301II
The line feed rate per line is specified by MSW5-2 setting.
[Caution] [The specification which is common to the model]
• Line feed rate can be specified respectively for both STANDARD MODE and PAGE MODE.
[Default] [The specification which depend on the model]
CT-S280/CT-S281/CT-S300/CT-S310/CT-P29x series
Approx. 4.23mm (1/360 inches)
CT-S2000/CT-S4000/ CT-S801(II)/CT-S851(II)/CT-S601(II)/
CT-S65 1(II)
(1) MSW 5-2 OFF:
Approx. 4.23mm
(2) MSW 5-2 ON:
Approx. 3.75 mm
CT-S280 CT-S300
CT-S281 CT-S310
/CT-S301II/CT-S251
CT-S2000 CT-S4000
CT-S801/851 CT-S601/651
- 93 -
CT-S251
CT-P29x series CT-S310 II