Esc = N - Citizen CT-S280 Command Reference Manual

ESC = n

Support model
[Function]
Data input control
[Code] <1B>H<3D>H<n>
[Range]
0≤n≤255
[Outline] [The specification which is common to the model]
• Selecting equipment for which data input from the host is valid.
• Each bit of "n" indicates as follows.
• When the printer has not been selected, this printer abandons all the received data until it is selected by this
command.
[Caution] [The specification which is common to the model]
• Even when the printer has not been selected, it can become BUSY state through printer
operation.
• When the printer is deselected, this printer discards all the data until it is selected with this command. (Except
DLE EOT, DLE ENQ, and DLE DC4)
[Default]
n=1
CT-S280 CT-S300
CT-S281 CT-S310
Bit Equipment
0
Printer
1
Not defined
2
Not defined
3 Not defined
4
Not defined
5
Not defined
6
Not defined
7 Not defined
CT-S2000 CT-S4000
CT-S801/851 CT-S601/651
Value
0
Invalid
—
—
—
—
—
—
—
- 320 -
CT-S251
CT-P29x series CT-S310 II
1
Valid
—
—
—
—
—
—
—