Playing Audio Via Bluetooth; Using The Speakerphone Feature - iHome iBT230 Instruction Manual

Playing Audio via Bluetooth

1. Press the Power/Alarm Reset Button to turn the unit ON.
2. Press and release the Mode Button as needed until "BT" appears on the display.
3. It is autoplay audio from your linked Bluetooth device and pause.
Play/Pause/Pairing Button on the unit to play audio from your linked Bluetooth device.
4. Press the
pair
5. Press the or
6. Press the or
your device, too.
7. When done listening, press the

Using the Speakerphone feature

NOTE: The unit must be powered on and linked to a Bluetooth phone to receive a call.
1. When a call is received, playing music is muted to hear the ring tone. "CALL" will
flash on the display. Adjust call volume on your device and/or on the unit as needed.
Button to answer the call; press and hold the
Press the
waiting function, press the
Button to switch between the calls.
press the
2. When a call is completed, press the
Buttons to go to the previous or next track.
Buttons to adjust the volume on the unit. You may need to adjust the volume on
Power/Alarm Reset Button to turn the unit off.
Button to place a currently active call on hold and answer a new call;
Using the
Button to end the call and resume previous function.
12
iBT230
Button to ignore the call. For call