Snooze/Display Dimmer Button/Sleep Mode/Fm Radio - iHome iBT230 Instruction Manual

Snooze/Display Dimmer Button
1. To program Snooze, press and hold the Snooze/Display Dimmer Button during normal operation
(when no alarm is sounding).
2. Press the or
3. Press and release the Snooze/Display Dimmer Button to confirm Snooze setting. 2 beeps will sound.
4. While the alarm is sounding, press and release the Snooze/Display Dimmer Button to temporarily
silence the alarm for the set duration (9 minutes is the default). Snooze can be used several times during
alarm.
5. To adjust the brightness of the display, press and release the Snooze/Display Dimmer Button during
normal operation (when no alarm is sounding) to cycle through the brightness display settings.
Sleep Mode
This unit allows you to sleep to the current sound source for a set time before turning the unit off.
1. To set Sleep time, press and release the Sleep/Clock Adjust Button as needed to cycle to the desired
sleep duration:120, 90, 60, 30 or 15 minutes or OFF (turns the unit off).
2. Press the or
stored separately from other volume settings.
FM Radio
Extend the FM antenna for best reception.
1. Press and release the Mode Button as needed until the FM indicator icon and
current FM radio frequency appear on the display.
2. Press the or
station).
3. Press the or
4. When you are through listening, press the
Buttons to select the desired snooze time (between 01 and 29 minutes).
Buttons to adjust the sleep volume on the unit. Note that the sleep volume setting is
Buttons to tune the radio to the desired station (hold to scan for the next clear
Buttons to adjust the volume on the unit.
Using the
Power/Alarm Reset Button to turn the unit off.
9
iBT230