Miller Electric XMT 350 Series Brochure & Specs page 3

XMT ® 350 VS Control Panel
Manufactured Under the
Following US Patents:
5,601,741 5,642,260 5,902,150
6,002,103 6,115,273 6,193,548
6,239,407 6,266,257 6,625,046
6,611,189 6,426,888
Other Patents Pending
1
2
1. Voltmeter
2. Process Selector Switch (Rotary Switch)
3. Ammeter
4. Voltage/Amperage Adjustment Control
5. Arc Control
NOTE:
VS model is equipped with Tweco-style output connector.
XMT ® 350 CC/CV Control Panel
Manufactured Under the
Following US Patents:
5,601,741 5,642,260 5,902,150
6,002,103 6,115,273 6,193,548
6,239,407 6,266,257 6,625,046
6,611,189 6,426,888
Other Patents Pending
1
2
3
1. Voltmeter
2. Remote Control Receptacle
3. Process Selector Switch (Rotary Switch)
4. Ammeter
5. Voltage/Amperage Adjustment Control
6. Arc Control
CC
Additional Features
3
Low OCV Stick — A built-in, selectable
4
feature, that reduces the Stick mode
open-circuit voltage (OCV) to nearly
15 volts when the welding power source is
not in use. Eliminates the need for add-on
voltage reducers.
Note: VS model is available only with
Tweco-style weld cable disconnects. Tweco
5
cable connectors are not supplied with the
unit and must be ordered separately.
Optional 115 VAC auxiliary power is not
available on VS model.
Pulsed MIG (GMAW-P) capability is not
available on VS model.
Additional Features
4
5
Auto Remote Sense
automatically use remote control if
connected to remote control receptacle.
Low OCV Stick — A built-in, selectable
feature, that reduces the Stick mode
open-circuit voltage (OCV) to nearly
15 volts when the welding power source is
6 not in use. Eliminates the need for add-on
voltage reducers.
Dinse International-style weld disconnects
provide high-quality weld cable connections.
Dinse and Tweco connectors are available.
When Dinse connectors are specified, two
connectors are supplied with the unit.
Optional 115 VAC auxiliary power provides
10 amps of circuit-breaker-protected power
for water circulators, etc.
Pulsed MIG (GMAW-P) capabilities with
optional Optima control reduces spatter
™
and distortion, allows better out-of-position
puddle control, and provides potential
reduction of fume particle emission.
enables unit to
™
3