Installation; Supplied Mounting Bracket - Vertex Standard VX-4600CB Operating Manual

Supplied Mounting Bracket

The supplied mounting bracket allows desktop or overhead mounting.
 Use a 5.5 mm bit to drill the holes to a surface which is more 10 mm thick and
can support more than 1.5 kg and secure the bracket with the supplied screws,
spring washers, flat washers, and nuts.
You may secure the bracket using the supplied tapping screws, instead of the
screws and nuts. In this case, drill the small pilot holes instead of the 5.5 mm
holes.
 Install the radio to the bracket using the supplied Knob Screws and Washers (or
Hex Head Bolts, depending on the situation).
Use only the supplied Knob Screws, Washers, Bolts, or equivalent
size screws (HSM5X12).
d m
esktop ount
d m
esktop ount
6
I
nstallatIon
( )
s & n
wItH crew ut
( )
t s
wItH appIng crew
(
o m
verHead ount wItH
(
o m
verHead ount wItH
VX-4600CB O
perating
)
s & n
crew ut
)
t s
appIng crew
M
anual