Base Station Installation - Vertex Standard VX-4600CB Operating Manual

Base Station Installation

Operation of the VX-4600CB from an AC line requires a power source capable
of providing at least 10 Amps continuously at 13.6 Volts DC. The FP-1030A AC
Power Supplies are available from your Vertex Standard dealer to satisfy these
requirements. Other well-regulated power supplies may be used, as well, if they
meet the above voltage and current specifications.
Use the supplied DC power cable for making power connections to the power
supply. Connect the RED power cable lead to the POSITIVE (+) power supply
terminal, and connect the BLACK power cable lead to the NEGATIVE (–) power
supply terminal.
8
I
nstallatIon
AC Power Supply
( 13.6 V, 10 A )
B s I
ase tatIon nstallatIon
VX-4600CB O
+
RED: POSITIVE ( ) Terminal
BLACK: NEGATIVE (–) Terminal
perating
Antenna
M
anual