Miller Electric Millermatic 140 Auto−Set Owner's Manual page 37

.
NOTE: Settings are approximate. Adjust as required.
IMPORTANT:
1.5/20 2/25 2/25
1.5/15 2/20 2/20
2/12 2/15
3.5/25
3/15
3.5/30
3.5/25
with optional Spool Gun, Order part no. 300371
A complete Parts List is available on-line at www.MillerWelds.com
"−−−" Means not recommended.
Thicker materials can be welded using proper technique,
joint preparation and multiple passes.
Match drive roll groove to diameter of wire being used. Set Tension
knob setting to 3 at start. Adjust tension per instructions in the manual.
2.5/30 3/45 3.5/60
3/35
2.5/30 3.5/40 4.5/55 6/75
2.5/20 3/25 3.5/30
3.5/25 4/40 4.5/50
3.5/20 4/25 4.5/35
3/12 4/20 4.5/30
1/15 2/20 3.5/35
1/10 2/15 3/25
2.5/10 3/15
3.5/45 4/50 4.5/70
4/45 5/60
3.5/28
2.5/20 3.5/25 4/40
2/70 4/70
2/70
2.5/65 4/60
.024" (0.6 mm) #220179
.030" (0.8 mm) #220179
.035" (0.9 mm) #220179
.045" (1.2 mm)
4/70 6/100
6/80
4.5/45 6/55 6.5/60 10/70
5/60 7/85
5.5/45
6/55 6.5/65
5.5/35 6/40 6.5/50
4/45 6/65 6.5/75
4/35 6/55 7/60
4/25 6/35 7/40
5/80 6/95
5/70 6/85 7.5/95
4.5/50 6/65 7.5/80
5/70 8/95 10/100
5/65 8/90 10/90
#202926
#202926
#202926
10/95
10/75
10/55
10/65
10/45
225 229−F
225 229-F
OM-225 311 Page 33