Initializing Keys And Certificates/Ca Certificates - Canon LBP7100Cn User Manual

0F40-075

Initializing Keys and Certificates/CA Certificates

Reset the key and certificate/CA certificate to the following default values.
Key and certificate
CA certificate
IMPORTANT
About SSL encrypted communication and IEEE 802.1X authentication after initialization
Initializing the key and certificate/CA certificate sets the following items to off.
[Security Settings] - [Remote UI Settings] - [Use SSL]
[Network Settings] - [IEEE 802.1X Settings] - [Use IEEE 802.1X]
1
Start the Remote UI, and then log in as Management Mode.
"Starting the Remote UI"
2
Click [Settings/Registration].
3
Display the [Initialize Key and Certificate] page.
(1) Select [Initialize Settings Information].
(2) Click [Initialize Key and Certificate].
None (all have been deleted)
1 (CA certificate pre-installed by default)