Cpu And Chassis Fan Connectors (4-Pin Cpu_Fan, 4-Pin Cha_Fan) - Asus H110I-PLUS D3 User Manual

3. Intel H110 Serial ATA 6.0Gb/s connectors (7-pin SATA6G_1~4)
®
These connectors connect to Serial ATA 6.0 Gb/s hard disk drives via Serial ATA 6.0
Gb/s signal cables.
H110I-PLUS D3 Intel
4.

CPU and chassis fan connectors (4-pin CPU_FAN, 4-pin CHA_FAN)

Connect the fan cables to the fan connectors on the motherboard, ensuring that the
black wire of each cable matches the ground pin of the connector
H110I-PLUS D3 Fan connectors
Do not forget to connect the fan cables to the fan connectors. Insufficient air flow inside
the system may damage the motherboard components. These are not jumpers! Do not
place jumper caps on the fan connectors! The CPU_FAN connector supports a CPU fan of
maximum 1A (12 W) fan power.
ASUS H110I-PLUS D3
SATA6G_1 SATA6G_4
GND
RSATA_TXP1 RSATA_TXP4
RSATA_TXN1 RSATA_TXN4
GND
RSATA_RXN1 RSATA_RXN4
RSATA_RXP1 RSATA_RXP4
GND
SATA6G_2 SATA6G_3
GND
RSATA_TXP2 RSATA_TXP3
RSATA_TXN2 RSATA_TXN3
GND
RSATA_RXN2 RSATA_RXN3
RSATA_RXP2 RSATA_RXP3
GND
SATA 6.0Gb/s connectors
®
CHA_FAN
GND
CHA FAN PWR
CHA FAN IN
+5V
CPU_FAN
+5V
CPU FAN IN
CPU FAN PWR
GND
GND
GND
GND
GND
GND
GND
1-15