Serial Port Connector/Front Panel Audio Connector - Asus H110I-PLUS D3 User Manual

1.7.2 Internal connectors
1. Serial port connector (10-1 pin COM1)
This connector is for a serial (COM) port. Connect the serial port module cable to this
connector, then install the module to a slot opening at the back of the system chassis.
H110I-PLUS D3 Serial port (COM) connector
The COM module is purchased separately.
2. Front panel audio connector (10-1 pin AAFP)
This connector is for a chassis-mounted front panel audio I/O module that supports
either HD Audio or legacy AC`97 audio standard. Connect one end of the front panel
audio I/O module cable to this connector.
H110I-PLUS D3 Front panel audio connector
•
•
1-14
SENSE2_RETUR
SENSE1_RETUR
AGND
We recommend that you connect a high-definition front panel audio module to this
connector to avail of the motherboard's high-definition audio capability.
If you want to connect a high-definition front panel audio module to this connector, set
the Front Panel Type item in the BIOS setup to [HD Audio]. If you want to connect an
AC'97 front panel audio module to this connector, set the item to [AC97]. By default,
this connector is set to [HD Audio].
COM1
PIN 1
AAFP
PORT2 L
SENSE_SEND
PORT2 R
PORT1 R
NC
PORT1 L
PIN 1
HD-audio-compliant
pin definition
NC
Line out_L
NC
NC Line out_R
NC MICPWR
AGND MIC2
PIN 1
Legacy AC'97
compliant definition
Chapter 1: Product introduction